AFL - Nexicom Systems Inc. Canadian Telecommunications Distributor with over 75 years of experience providing product and solutions for leading-edge voice, video and data services. Fri, 30 Jan 2026 21:52:12 +0000 en-CA hourly 1 https://wordpress.org/?v=7.1.4 https://staging.nexicomsystems.com/wp-content/uploads/2023/09/cropped-Nexicom-Systems-Logo300-icon-32x32.png AFL - Nexicom Systems Inc. 32 32 FASTConnect, SC/LC/ST Boot Kit 3mm, Black, Pack of 100 https://staging.nexicomsystems.com/products/fiber-optics-cable/fiber-patch-cords/fastconnect-sc-lc-st-boot-kit-3mm-black-pack-of-100/ Tue, 11 Nov 2025 13:31:00 +0000 https://www.nexicomsystems.com/products/uncategorized/product-13/ FASTConnect, SC/LC/ST Boot Kit 3mm, Black, Pack of 100

The post FASTConnect, SC/LC/ST Boot Kit 3mm, Black, Pack of 100 appeared first on Nexicom Systems Inc..

]]> FASTConnect are factory pre-polished, field-installable connectors that completely eliminate the need for hand polishing in the field. Proven mechanical splice technology ensuring precision fiber alignment, a factory pre-cleaved fiber stub and a proprietary index-matching gel combine
to offer an immediate low loss termination to either single-mode or multimode optical fibers. FASTConnect are compatible with 250 µm and 900 µm optical fibers, as well as 4.8 mm (SC only) cordage.
All primary fiber types are supported, and each connector is color coded per industry standard requirements to aide in identification during and after installation. A factory-installed wedge clip (included with each connector) is removed and discarded upon completion of the termination.
Incorporated into this device is an innovative, translucent wedge enabling
the use of a common VFI to provide a “pass/fail” signal once physical
contact is achieved.

Features

• No epoxy, no Polish
• Low insertion loss
• Fiber can be reinserted up to three times
• 4.8 mm (SC only) cordage compatibility
• VFI accessory to confirm proper installation

Applications

• Premise/Enterprise Networks
• LAN/WAN Connections
• Patch Panels
• Equipment Termination
• FTTx Applications
• Field Repair/Replacement
• Equipment Test Leads

The post FASTConnect, SC/LC/ST Boot Kit 3mm, Black, Pack of 100 appeared first on Nexicom Systems Inc..

]]> FASTConnect, High Precision Tool Kit with CT50 Cleaver https://staging.nexicomsystems.com/products/fiber-optics-cable/fiber-patch-cords/fastconnect-high-precision-tool-kit-with-ct50-cleaver/ Tue, 11 Nov 2025 13:31:00 +0000 https://www.nexicomsystems.com/products/uncategorized/product-14/ FAST-Connectors - DATASHEET

The post FASTConnect, High Precision Tool Kit with CT50 Cleaver appeared first on Nexicom Systems Inc..

]]> The FASTConnect Universal Tool Kits provide all the necessary installation tools required for fiber preparation of 250 μm or 900 μm fibers, or 900 μm, 2 mm or 3 mm cordage for AFL’s pre-polished FASTConnect. Featuring either the CT50 or CT16 fiber cleaver, the FASTConnect Universal Tool Kit contains all the industry standard termination tools required for fiber preparation. Additionally, the carrying case has adequate storage for extra FASTConnects for on-site convenience.

The post FASTConnect, High Precision Tool Kit with CT50 Cleaver appeared first on Nexicom Systems Inc..

]]> FASTConnect, High Precision Tool Kit with CT16 Cleaver https://staging.nexicomsystems.com/products/fiber-optics-cable/fiber-patch-cords/fastconnect-high-precision-tool-kit-with-ct16-cleaver/ Tue, 11 Nov 2025 13:31:00 +0000 https://www.nexicomsystems.com/products/uncategorized/product-15/ FASTConnect, High Precision Tool Kit with CT16 Cleaver

The post FASTConnect, High Precision Tool Kit with CT16 Cleaver appeared first on Nexicom Systems Inc..

]]> The FASTConnect Universal Tool Kits provide all the necessary installation tools required for fiber preparation of 250 μm or 900 μm fibers, or 900 μm, 2 mm or 3 mm cordage for AFL’s pre-polished FASTConnect. Featuring either the CT50 or CT16 fiber cleaver, the FASTConnect Universal Tool Kit contains all the industry standard termination tools required for fiber preparation. Additionally, the carrying case has adequate storage for extra FASTConnects for on-site convenience.

The post FASTConnect, High Precision Tool Kit with CT16 Cleaver appeared first on Nexicom Systems Inc..

]]> FASTConnect, SC, SM, 900µm Strain Relief, APC, Green, Pack of 100 https://staging.nexicomsystems.com/products/fiber-optics-cable/fiber-patch-cords/fastconnect-sc-sm-900%c2%b5m-strain-relief-apc-green-pack-of-100/ Tue, 11 Nov 2025 13:30:59 +0000 https://www.nexicomsystems.com/products/uncategorized/product-9/ FASTConnect, SC, SM, 900µm Strain Relief, APC, Green, Pack of 100

The post FASTConnect, SC, SM, 900µm Strain Relief, APC, Green, Pack of 100 appeared first on Nexicom Systems Inc..

]]> FASTConnect are factory pre-polished, field-installable connectors that completely eliminate the need for hand polishing in the field. Proven mechanical splice technology ensuring precision fiber alignment, a factory pre-cleaved fiber stub and a proprietary index-matching gel combine
to offer an immediate low loss termination to either single-mode or multimode optical fibers. FASTConnect are compatible with 250 µm and 900 µm optical fibers, as well as 4.8 mm (SC only) cordage.
All primary fiber types are supported, and each connector is color coded per industry standard requirements to aide in identification during and after installation. A factory-installed wedge clip (included with each connector) is removed and discarded upon completion of the termination.
Incorporated into this device is an innovative, translucent wedge enabling
the use of a common VFI to provide a “pass/fail” signal once physical
contact is achieved.

Features

• No epoxy, no Polish
• Low insertion loss
• Fiber can be reinserted up to three times
• 4.8 mm (SC only) cordage compatibility
• VFI accessory to confirm proper installation

Applications

• Premise/Enterprise Networks
• LAN/WAN Connections
• Patch Panels
• Equipment Termination
• FTTx Applications
• Field Repair/Replacement
• Equipment Test Leads

The post FASTConnect, SC, SM, 900µm Strain Relief, APC, Green, Pack of 100 appeared first on Nexicom Systems Inc..

]]> FASTConnect, SC/LC/ST Boot Kit 2mm, Black, Pack of 6 https://staging.nexicomsystems.com/products/fiber-optics-cable/fiber-patch-cords/fastconnect-sc-lc-st-boot-kit-2mm-black-pack-of-6/ Tue, 11 Nov 2025 13:30:59 +0000 https://www.nexicomsystems.com/products/uncategorized/product-10/ FASTConnect, SC/LC/ST Boot Kit 2mm, Black, Pack of 6

The post FASTConnect, SC/LC/ST Boot Kit 2mm, Black, Pack of 6 appeared first on Nexicom Systems Inc..

]]> FASTConnect are factory pre-polished, field-installable connectors that completely eliminate the need for hand polishing in the field. Proven mechanical splice technology ensuring precision fiber alignment, a factory pre-cleaved fiber stub and a proprietary index-matching gel combine
to offer an immediate low loss termination to either single-mode or multimode optical fibers. FASTConnect are compatible with 250 µm and 900 µm optical fibers, as well as 4.8 mm (SC only) cordage.
All primary fiber types are supported, and each connector is color coded per industry standard requirements to aide in identification during and after installation. A factory-installed wedge clip (included with each connector) is removed and discarded upon completion of the termination.
Incorporated into this device is an innovative, translucent wedge enabling
the use of a common VFI to provide a “pass/fail” signal once physical
contact is achieved.

Features

• No epoxy, no Polish
• Low insertion loss
• Fiber can be reinserted up to three times
• 4.8 mm (SC only) cordage compatibility
• VFI accessory to confirm proper installation

Applications

• Premise/Enterprise Networks
• LAN/WAN Connections
• Patch Panels
• Equipment Termination
• FTTx Applications
• Field Repair/Replacement
• Equipment Test Leads

The post FASTConnect, SC/LC/ST Boot Kit 2mm, Black, Pack of 6 appeared first on Nexicom Systems Inc..

]]> FASTConnect, SC/LC/ST Boot Kit 2mm, Black, Pack of 100 https://staging.nexicomsystems.com/products/fiber-optics-cable/fiber-patch-cords/fastconnect-sc-lc-st-boot-kit-2mm-black-pack-of-100/ Tue, 11 Nov 2025 13:30:59 +0000 https://www.nexicomsystems.com/products/uncategorized/product-11/ FASTConnect, SC/LC/ST Boot Kit 2mm, Black, Pack of 100

The post FASTConnect, SC/LC/ST Boot Kit 2mm, Black, Pack of 100 appeared first on Nexicom Systems Inc..

]]> FASTConnect are factory pre-polished, field-installable connectors that completely eliminate the need for hand polishing in the field. Proven mechanical splice technology ensuring precision fiber alignment, a factory pre-cleaved fiber stub and a proprietary index-matching gel combine
to offer an immediate low loss termination to either single-mode or multimode optical fibers. FASTConnect are compatible with 250 µm and 900 µm optical fibers, as well as 4.8 mm (SC only) cordage.
All primary fiber types are supported, and each connector is color coded per industry standard requirements to aide in identification during and after installation. A factory-installed wedge clip (included with each connector) is removed and discarded upon completion of the termination.
Incorporated into this device is an innovative, translucent wedge enabling
the use of a common VFI to provide a “pass/fail” signal once physical
contact is achieved.

Features

• No epoxy, no Polish
• Low insertion loss
• Fiber can be reinserted up to three times
• 4.8 mm (SC only) cordage compatibility
• VFI accessory to confirm proper installation

Applications

• Premise/Enterprise Networks
• LAN/WAN Connections
• Patch Panels
• Equipment Termination
• FTTx Applications
• Field Repair/Replacement
• Equipment Test Leads

The post FASTConnect, SC/LC/ST Boot Kit 2mm, Black, Pack of 100 appeared first on Nexicom Systems Inc..

]]> FASTConnect, SC/LC/ST Boot Kit 3mm, Black, Pack of 6 https://staging.nexicomsystems.com/products/fiber-optics-cable/fiber-patch-cords/fastconnect-sc-lc-st-boot-kit-3mm-black-pack-of-6/ Tue, 11 Nov 2025 13:30:59 +0000 https://www.nexicomsystems.com/products/uncategorized/product-12/ FASTConnect, SC/LC/ST Boot Kit 3mm, Black, Pack of 6

The post FASTConnect, SC/LC/ST Boot Kit 3mm, Black, Pack of 6 appeared first on Nexicom Systems Inc..

]]> FASTConnect are factory pre-polished, field-installable connectors that completely eliminate the need for hand polishing in the field. Proven mechanical splice technology ensuring precision fiber alignment, a factory pre-cleaved fiber stub and a proprietary index-matching gel combine
to offer an immediate low loss termination to either single-mode or multimode optical fibers. FASTConnect are compatible with 250 µm and 900 µm optical fibers, as well as 4.8 mm (SC only) cordage.
All primary fiber types are supported, and each connector is color coded per industry standard requirements to aide in identification during and after installation. A factory-installed wedge clip (included with each connector) is removed and discarded upon completion of the termination.
Incorporated into this device is an innovative, translucent wedge enabling
the use of a common VFI to provide a “pass/fail” signal once physical
contact is achieved.

Features

• No epoxy, no Polish
• Low insertion loss
• Fiber can be reinserted up to three times
• 4.8 mm (SC only) cordage compatibility
• VFI accessory to confirm proper installation

Applications

• Premise/Enterprise Networks
• LAN/WAN Connections
• Patch Panels
• Equipment Termination
• FTTx Applications
• Field Repair/Replacement
• Equipment Test Leads

The post FASTConnect, SC/LC/ST Boot Kit 3mm, Black, Pack of 6 appeared first on Nexicom Systems Inc..

]]> FASTConnect, SC, SM, 900µm Strain Relief, APC, Green, Pack of 6 https://staging.nexicomsystems.com/products/fiber-optics-cable/fiber-patch-cords/fastconnect-sc-sm-900%c2%b5m-strain-relief-apc-green-pack-of-6/ Tue, 11 Nov 2025 13:30:58 +0000 https://www.nexicomsystems.com/products/uncategorized/product-8/ FASTConnect, SC, SM, 900µm Strain Relief, APC, Green, Pack of 6

The post FASTConnect, SC, SM, 900µm Strain Relief, APC, Green, Pack of 6 appeared first on Nexicom Systems Inc..

]]> FASTConnect are factory pre-polished, field-installable connectors that completely eliminate the need for hand polishing in the field. Proven mechanical splice technology ensuring precision fiber alignment, a factory pre-cleaved fiber stub and a proprietary index-matching gel combine
to offer an immediate low loss termination to either single-mode or multimode optical fibers. FASTConnect are compatible with 250 µm and 900 µm optical fibers, as well as 4.8 mm (SC only) cordage.
All primary fiber types are supported, and each connector is color coded per industry standard requirements to aide in identification during and after installation. A factory-installed wedge clip (included with each connector) is removed and discarded upon completion of the termination.
Incorporated into this device is an innovative, translucent wedge enabling
the use of a common VFI to provide a “pass/fail” signal once physical
contact is achieved.

Features

• No epoxy, no Polish
• Low insertion loss
• Fiber can be reinserted up to three times
• 4.8 mm (SC only) cordage compatibility
• VFI accessory to confirm proper installation

Applications

• Premise/Enterprise Networks
• LAN/WAN Connections
• Patch Panels
• Equipment Termination
• FTTx Applications
• Field Repair/Replacement
• Equipment Test Leads

The post FASTConnect, SC, SM, 900µm Strain Relief, APC, Green, Pack of 6 appeared first on Nexicom Systems Inc..

]]> AFL RIBBON FORMING GLUE 4-OZ https://staging.nexicomsystems.com/products/test-sets-and-accessories/fiber-tools/afl-ribbon-forming-glue-4-oz/ Thu, 04 Jul 2024 19:42:38 +0000 https://dev2.nexicomsystems.com/products/uncategorized/afl-ribbon-forming-glue-4-oz/ The post AFL RIBBON FORMING GLUE 4-OZ appeared first on Nexicom Systems Inc..

]]> The post AFL RIBBON FORMING GLUE 4-OZ appeared first on Nexicom Systems Inc..

]]>